Car keys · Woolwich
Car Key Replacement
You bought the car privately and it came with a single key on a shoelace.
In plain words
Losing a key is also a security event, and replacement is the moment to close it. The locksmith can erase the missing key from the immobilizer's memory during programming, so a stranger who finds it holds a blade that opens a door and a chip the car no longer answers to; the remote is unpaired the same way. If you would like to go further, every cylinder the old blade operated, doors, ignition and any trunk or fuel-door lock, can be changed so it fits nothing. You leave with new keys that work, old keys that are silent, and a note of how many keys the car now recognizes.
How the visit goesThe engine cranks, catches for a second and dies, and a small key-shaped light keeps blinking on the dash. The blade turns the ignition and the doors perfectly well, but the car has stopped recognizing the chip inside the key.
Car Key Replacement
How the visit goes
The car itself: battery, access and location
Programming writes to the vehicle's computers, so the locksmith checks the basics of the car before starting. A weak battery from a car that has sat locked for weeks is put on a maintainer so the voltage stays steady through the session. The diagnostic port under the dash has to be reachable, which means the car has to be opened first if every key is gone. Where the car is parked matters as well: an underground garage with poor light, a tight street spot or a snowbank against the driver's door all shape how the work is set up. A few questions on the phone cover most of this.
Pairing the remote and the proximity fob
The buttons on a key and the transponder in it are usually separate systems, and the remote is paired in its own step. Depending on the vehicle, that is an on-board routine of ignition cycles and button presses, or a command sent through the programming tool. A proximity fob is registered so the car detects it near the door handles and inside the cabin, and push-button start is tested with the fob in a pocket, then held against the start button as the backup method. Remote start, trunk release and panic are checked one at a time, since a wrong part number can pass every step except the one you use most.
Ownership paperwork kept in order
The visit closes with your documents back in your hands and a copy of the authorization record kept by the locksmith, which is the industry's way of tying every key made to a named owner and a VIN. It is a good moment to check that the vehicle permit is current and in your name, especially after a private purchase, since the ownership transfer is what makes future key service straightforward. Keep the permit in your wallet or with your licence rather than in the glovebox next to a spare key, so a break-in gives nobody both the car's identity and a way to drive it.
Car Key Replacement
In the van
Remote frequency tester
Decoding pick and lock reader
Proximity fob with emergency blade
Transponder key blank
Vehicle battery maintainer
Car Key Replacement
What affects the quote
Condition of the locks and ignition
A door cylinder seized with salt or an ignition with worn wafers may need freeing, servicing or rebuilding for the new key to feel right. That work is quoted as its own item alongside the key.
One working key or none
A spare added beside a working key is a shorter routine. Starting from nothing means working through whatever that vehicle's own all-keys-lost procedure calls for, commonly opening the car, decoding the lock and resetting the immobilizer, and the quote reflects those extra stages.
How many keys you leave with
Each key is a blank, a cut and a programming slot, so the total follows the count. Making the spare during the same visit is usually the sensible time to do it.
What to have ready
- Has the car's battery been flat or disconnected recently?
- What is the year, make and model, and can you read the VIN from the windshield or the permit?
- How many keys would you like to leave with?
Car Key Replacement: questions
QuestionsThe car is leased or belongs to my employer. Can you still make me a key?
Yes, with the right paperwork. For a leased car, the lease agreement in your name together with your identification and the permit covers it. For a company vehicle, the locksmith needs authorization from the business: a work order, purchase order or letter naming the VIN and the person collecting the key. Mention the arrangement when you call so the correct document is ready and the record can be completed properly.
The key snapped off inside the lock. What happens now?
The broken piece is drawn out with an extractor that grips it rather than pushing it deeper, and the cylinder is checked for damage. The head of the key, if it survived, still holds the chip and the remote, so it can be rebuilt around a new blade in a new case without any programming. If the whole key was lost with the break, a fresh transponder key is cut to code and programmed as usual.
Does the car have to be towed to a shop?
Often not. The cutting machine, blanks and programming tool travel in the van, and the work is done where the car sits: a driveway, a parking garage, the roadside or a workplace lot. The locksmith connects to the diagnostic port under the dash and cuts and programs on the spot. An unsupported or dealer-only system may still need the vehicle to go to a dealer or a suitably equipped shop, which the VIN check flags beforehand.
Related services
- Spare Car Key DuplicationThe proximity fob has ridden in a pocket for years, the range feels shorter than it used to, and a dashboard warning mentioned a battery a while back.
- Key Fob ProgrammingA fob went missing weeks ago somewhere between a coat pocket and a parking lot, and a spare has covered the gap since.
- Transponder Key ProgrammingThe blade snapped off flush with the door lock last winter, and the shop that cut a replacement only matched the metal shape.